Product Description
JST60 injection blow molding machine
1.Apply the double vertical pole and single horizontal beam to make enough rotation space,longer bottles,make the mold installation easy and simple.
2.The injection mold adopt the double assisstant cylinder open-close mold,ensure the stable and quick moving.The clamping force is three points equal distribution high-speed hydraulic-added valve can increase the clamping speed.
A). Neck part is made by injection providing the mouth & screw precision, can 100% matching cap, no any leakage.
B), No clamping line at bottom & clamping line at body side smooth for labeling. Bottle with balance wall thickness & No flash to save material.
C). Body & bottom with strong mechanical strength.
No | Item | Unit | Data | N0. | Item | Unit | Data |
1 | Screw diameter | mm | 50 | 20 | Idle time | S | 6.5 |
2 | Screw L/D ratio | | 22.5 | 21 | Eject stroke | mm | 200 |
3 | Max injection capacity | cm | 324 | 22 | Height of eject plate | mm | 1100 |
4 | Injection capacity(PS) | g | 342 | 23 | Max mould plate size | mm | 740*390 |
5 | Max theoretical injection pressure | Mpa | 14 | 24 | Min mould thickness | mm | 280 |
6 | Theoretical injection rate | Cm3 /sec | | 25 | Motor power | KW | 30 |
7 | Screw stroke | mm | | 26 | Mould heated power | KW | 4.4 |
8 | Screw torque | Kg.m | 60 | 27 | Hydraulic system pressure | Mpa | 14 |
9 | Screw rotate speed | rpm | | 28 | Rotate table enhance | mm | 70 |
10 | Spray pressure stroke | T/mm | | 29 | Compress Air consumption | M3/min | 0.8 |
11 | Barrel Heating power | KW | 11.85 | 30 | Pneumatic system pressure | mm | 1.0 |
12 | Heating zone | Qty | 3 | 31 | Cooling water consumption | M3/H | 3 |
13 | Radius of spray jet | mm | | 32 | Range of forming products | L | 0.02-1.2 |
14 | clamping force of Injection mould | KN | 600 | 33 | Height of forming products | mm | 200 |
15 | opening force of Injection mould | KN | 68 | 34 | Diameter of forming products | mm | 100 |
16 | Injection stroke | mm | 140 | 35 | Core height of pin | mm | 120 |
17 | Claming force of Blowing mould | KN | 89 | 36 | Volume of tank | L | 600 |
18 | Opening force of blowing mould | KN | 55 | 37 | Machine size | m | 4.5*1.67*2.35 |
19 | Claming stroke | mm | 140 | 38 | Machine weight | T | 1 |
Company Information
Our products include: liquid filling machine ( water ,fruit juice/tea ,carbonated drink ,oil ,alcohol, plant protein drink and ect.) Barreled filling line (3-5gallon) Water treatment ,Labeling &packing machine,semi-automatic /full automatic bottle blowing machine .injection molding machine. Main Products :
1). 2000-12000 bottles per hour water filling line
2). 2000-12000 bottles per hour carbonated filling line
3). 2000-8000 bottles per hour beer filling line
4). 2000-12000 bottles per hour juice filling line
5). 2000-8000 bottles per hour wine filling line
6). 120-1200 bottles per hour for 5 gallon / 3 gallon filling line
7). Linear type PET bottle detergent filling factory
8). PVC and adhesve labels
9). Plastic injection molding machine and blowing machine